Power outages can occur due to various natural disasters such as snowstorms, hurricanes, windstorms or other disturbances to the electrical grid. It’s important to be ready for these situations to ensure you’re not left stranded in your garage. In case of a power outage, you can manually open your garage door by following these steps:

Manually opening your garage door from the inside is a process that anyone can do. It requires the following steps:

Step 1: The Door Must Be Fully Closed

Before you can manually open your garage door from the inside, you’ll need to make sure the door is fully closed. If the door is partially open or stuck, you’ll need to close it completely before proceeding. This can be done by using the manual release handle on the opener or by pushing the door closed manually.

Step 2: Where’s the Bypass Handle?

The next step is to locate the manual release handle, also known as the bypass handle. This is typically a red cord that hangs down from the opener and they can find it on the back of the opener or on the side. Some models might have a different color or shape, but it is usually located in the same area.

Step 3: Pull this rope

Once you’ve located the manual release handle, you’ll need to pull it down towards the ground. This will release the opener trolley from the rail, allowing you to open the door manually. You should hear a click sound when the trolley disengages from the opener.

Step 4: Locate the Lifting Handle and Pull Up

Now that the trolley is disconnected, you can lift the door manually by using the handle located on the bottom of the door. If your door is heavy, you may need help from someone else to lift it. Once the door is open, you’ll need to keep it in place by using a door stop or by placing a piece of wood under the bottom of the door.

Step 5: Reconnect The Opener

After you have finished using your garage door manually, it is important to reconnect the opener by pulling the rope back up and securing the trolley to the opener. This will allow you to use your opener again when the power returns.

In conclusion, opening your garage door manually from the inside is a simple process that anyone can do. By locating the manual release handle, pulling it down, lifting the door manually, and reconnecting the opener, you’ll be able to open and close your garage door even if you lose power. Remember to always be careful when opening and closing your garage door manually, and be sure to keep the manual release handle in a place where you can easily find it in case of an emergency.

Safety Tips for Manually Opening Your Garage Door

When manually opening your garage door, it’s important to take safety precautions to avoid injury or damage to your property. Here are a few tips to keep in mind:

1. Always unplug the automatic door opener before attempting to open the door manually.
2. If you’re unsure about how to open your garage door or if you’re experiencing problems, it’s best to call a professional technician for assistance.
3. Never pull the emergency release when the door is open, as this can cause the door to close unexpectedly.
4. Always keep an eye on the open door and never leave it unattended.
5. If your garage door has a manual lock, make sure to use it to keep the door securely in place.
6. Be aware of any issues that may arise and address them promptly to avoid any potential hazards.

In short, safety should always be the top priority when manually opening your garage door. Follow these tips to ensure that we do safely the process and efficiently.

If you’re in need of professional installation services for an automatic garage door opener in Greeley, look no further than Greeley Garage Door Repair. Our team of experts is dedicated to providing you with the convenience and security you need for your home. Whether you’re in need of repair services or installing a new opener, don’t hesitate to reach out to us today. Trust us to handle all your garage door needs.